© Brighteon.com All Rights Reserved. All content posted on this site is commentary or opinion and is protected under Free Speech. Brighteon is not responsible for comments and content uploaded by our users.
I had to replace the head light on my 2017 Dodge Ram today. I watched a tutorial on the youtube channel "big daddy's house" titled "Remove HEADLIGHTS DODGE RAM" which helped immensely in even knowing how to proceed. Otherwise I had no clue how to replace it. A big thanks to "big daddy's house"!
But I struggled a bit on actually taking the unit out once the bolts were removed and the plastic L lock was lifted up under the fender.
So I am just attempting here to add a couple bits of information to what he already showed.
~It requires removing 2 bolts (10 mm hex heads).
~The bolt down in the bottom requires a long extension to reach.
~Sliding L lock up from behind accessed from a trap door under the fender.
~Once the two bolts are removed and the L tab slid up push the whole unit forward gently from at the edge of the fender. And rotate the unit out in a clockwise motion (drivers side). (To push the unit forward I gently used a pry bar but it does not take much effort, the pry bar is way over kill. A firm tug by hand would probably accomplish the same results just to release the tab from where the L lock holds it. )
I do not do tutorial videos so the video is kind of a hack job holding the phone with one hand and attempting to describe what I did and what I found helpful in removing the unit in order to replace the bulb.
Hopefully an added perspective will help you out when you need to replace your headlight or marker light. I suggest you watch the other guys video first.





